最新優惠:
推拉門配件批發,工業平移門配件,電動提升門配件,車庫門彈簧,75工業門邊,工業門扭簧,工業門包角,工業門門邊
全國服務熱線:聯系我們  
400-6080-090   
  • 工業快速門配件商城
  •   
  • 全國熱線:400-6080-090
  •   
  • 聯系人:于經理
  •   
  • 手機:18940220412(媒體勿擾)
  • 您現在的位置是   首頁>>最新資訊 >> 「工業推拉門配件」廠房平移門拉不動的原因-推拉門修理

      「工業推拉門配件」廠房平移門拉不動的原因-推拉門修理

      作者:廠房推拉門維修配件更換   時間:2019/8/24 9:28:35
    •  

      「工業推拉門配件」廠房平移門拉不動的原因-推拉門修理


      Reasons for the Instability of the Translational Door of Industrial Push-and-Pull Door Fittings-Repair of the Push-and-Pull Door




      廠房推拉門廠家剖析推拉門拉不動怎么弄:


      Factory Push-pull Door Manufacturer Analysis Push-pull Door can not move how to do:


      1、當推拉門呈現對不上卡槽的情況時,說明上下滑道現已呈現偏移軌跡的情況,在這種情況下,推拉門自然會無法推進,因而要讓滑輪滑塊,盡量削減摩擦力才可以,你要做的就是整理滑到的污漬。


      1. When the sliding door is not in the slot, it shows that the upper and lower slideways are now showing a migration track. In this case, the sliding door will naturally not be able to move forward, so the pulley block should be allowed to reduce friction as much as possible. All you have to do is to clean up the stains.

       

       

      沈陽廠房電動推拉門




      2、滑道整理潔凈后,查看滑道與滑輪觸摸之處是否有東西阻礙,從而增大了它們之間的摩擦力,比方類似通明膠帶的塑料紙,或是一些現已呈現爆皮現象的地方,有的話將雜物整理潔凈。


      2. After cleaning the slideway, check if there are any obstacles in the touching area between the slideway and the pulley, thus increasing the friction between them, such as plastic paper with gelatin tape, or some places where the phenomenon of skin explosion has now appeared, or if there is any, clean up the debris.


      3、即使是推拉門呈現滑塊現象,開關處也別忘了處理。在卡扣與卡槽對不齊的情況下,要想方法進行調整,一般情況下,用螺絲刀調節螺絲后,就可以對卡槽方位進行操控。


      3. Don't forget to deal with the switch even if the slider appears in the sliding door. In the case of uneven snap and slot, in order to adjust the method, in general, after adjusting the screw with a screwdriver, the orientation of the slot can be manipulated.


      4、弄好之后,記得把推拉門縫隙當中的污漬整理潔凈,這樣就可以使用了。


      4. After finishing, remember to clean up the stain in the gap of the sliding door, so that it can be used.


      但如果是廠房推拉門的滑輪損壞了,就要找人員上門換滑輪,別自己拆裝。


      But if the pulley of the sliding door of the factory building is damaged, it is necessary to find people to change the pulley at the door and not disassemble and assemble by themselves.


      本廠專業生產廠房提升門,大型推拉門,平開門,批發各種工業門配件,價格低廉,歡迎新來客戶來電訂購。


      Our factory specializes in manufacturing Lifting doors, large sliding doors, flat doors, wholesale all kinds of industrial door accessories, low prices, welcome new customers to order.

    百度地圖 - 網站地圖 - 日本高清视频在线无吗_亚洲日韩国产欧美二区_思思久久96热在精品国产