Selection of Industrial Translational Door Track for "Translational Door Accessories"
Installation track of industrial translation door and then equipped with a motor can realize remote control and automatic door opening, which is convenient and fast.
The commonly used aluminium alloy doors are divided into double-open doors and translation doors. They are usually used for the entrance of private villas'self-built houses. They also include wall doors or slot doors. Here, the installation of the track of translation doors is emphasized.
1. Material selection for track of translation door; I-beam steel with hot-dip galvanized steel as raw material is generally adopted, with high strength and no rust (high-voltage tower is hot-dip galvanized, non-market galvanized pipe)
2. Installation dimension requirement of aluminium alloy translation door. Firstly, the track height of translation door should be higher than 10 mm of marble surface. Marble can be sealed next to the track, so there will be no gap.
Another is to install on the marble floor flat, with 5 mm gaps left on both sides of the track for stainless steel pulleys to slide.
平移門軌道距離門柱水泥墩（已貼好大理石面計算）100mm，（即：大門一般的邊框30mm 導槽寬度50mm 縫隙20mm），平移門軌道長度一般是整個大門的一倍，如果大門寬度是4.3米，那么導軌長度就是8.6米。
The track length of the translation door is 100 mm from the cement pier of the portal column (calculated by the marble surface), (i.e. the width of the 30 mm guide slot of the general gate frame is 50 mm and the gap is 20 mm). The track length of the translation door is usually twice that of the whole gate. If the width of the gate is 4.3 meters, the length of the guide rail is 8.6 meters.
The trajectory of the translation door is 1 cm above the ground. It can be sealed and tiled around. The gap is too big, ugly and not easy to clean.
For installation of pre-embedded parts of pulley position at upper end of aluminium alloy translation door, please call Mr. Li if you need to watch video of installation site of guide rail of translation door.
The company wholesale translation door accessories, motors, racks and other products, used in a variety of styles and models of translation doors, industrial sliding doors, a large number of spot, low-cost wholesale, welcome to purchase.