最新優惠:
推拉門配件批發,工業平移門配件,電動提升門配件,車庫門彈簧,75工業門邊,工業門扭簧,工業門包角,工業門門邊
全國服務熱線:聯系我們  
400-6080-090   
  • 工業快速門配件商城
  •   
  • 全國熱線:400-6080-090
  •   
  • 聯系人:于經理
  •   
  • 手機:18940220412(媒體勿擾)
  • 您現在的位置是   首頁>>最新資訊 >> 「提升門扭簧」垂直提升門彈簧調松緊方法

      「提升門扭簧」垂直提升門彈簧調松緊方法

      作者:提升門彈簧   時間:2019/7/17 11:20:18
    •  

      「提升門扭簧」垂直提升門彈簧調松緊方法


      The Method of Adjusting and Tightening Vertical Lifting Door Spring




      工業提升門離不開彈簧系統的平衡作用,不外彈簧平衡系統使用時間長了,也會出現過松或過緊的問題,這時就需要專業技術職員來進行調試處理。


      Industrial lifting door can not be separated from the balance function of spring system, but the spring balance system has been used for a long time, there will be too loose or too tight problems, which requires professional and technical staff to debug and deal with.

       

      電動提升門彈簧調節松緊的方法




      一般來說,涉及到工業提升門彈簧系統就只有調整松緊的問題了。


      Generally speaking, when it comes to the spring system of industrial lifting door, the only problem is to adjust the tightness.


      彈簧調松、調緊的方法不同,詳細內容如下所示:


      Spring loosening and tightening methods are different. Details are as follows:


      門業工業門彈簧調緊方法:


      Spring tightening method for door industry:


      這一調整過程極為復雜,需要兩人配合完成。


      This adjustment process is extremely complex and needs the cooperation of two people to complete.


      「提升門扭簧」垂直提升門彈簧調松緊方法


      The Method of Adjusting and Tightening Vertical Lifting Door Spring



      操縱時,先用鼎力鉗夾住緊簧座四周的軸,然后一人將緊簧桿插入緊簧座內用力向上穩住,另一人松開緊簧座上的兩顆方型螺絲后,再將另一緊簧桿插入另一緊簧孔內,兩人平均用力向上抬。


      During the operation, the axle around the spring seat is clamped with a tripod clamp, then one person inserts the spring rod into the spring seat and forces it upward. The other person loosens the two square screw on the spring seat, then inserts the other spring rod into the hole of the other spring. The two people lift the spring rod upward with average force.
       

      垂體提升門彈簧



      待達到預定的圈數后,再用一個方形螺絲將彈簧鎖在軸的鍵槽內,另一螺絲鎖在軸上。

      After reaching the predetermined number of circles, a square screw is used to lock the spring in the key groove of the shaft, and another screw is locked on the shaft.


      假如彈簧調的過緊,則需要松開重新調整 。


      If the spring is overstretched, it needs to be loosened and readjusted.


      工業門彈簧調松方法:


      Method for adjusting spring loosening of industrial door:


      同緊彈簧一樣,這一操縱過程也需要兩人配合完成。其操縱方法的第一步同上面的彈簧調緊一樣。


      As with the tight spring, this control process also requires the cooperation of two people to complete. The first step of the control method is the same as the spring tightening above.


      此外,在調松彈簧時,為了安全起見,建議大家在原來圈數的基礎上每半圈半圈地進行加減,同時每加、減一次,都要停下來試一下,然后判斷是否還需要繼承增加或減少圈數。


      In addition, when adjusting the spring, in order to be safe, it is suggested that we add or subtract every half circle and half circle on the basis of the original number of circles, and at the same time stop and try every addition or subtraction, and then judge whether it is necessary to inherit the increase or decrease of the number of circles.


      千萬不能一次性幾圈幾圈地加大或減少提升門彈簧的圈數,否則彈簧過緊,工業門的門體就會沖出軌道。


      Must not increase or decrease the number of rings of the lifting door spring several times at a time, otherwise the spring is too tight, the door body of the industrial door will rush out of the track.

       

    百度地圖 - 網站地圖 - 日本高清视频在线无吗_亚洲日韩国产欧美二区_思思久久96热在精品国产