最新優惠:
推拉門配件批發,工業平移門配件,電動提升門配件,車庫門彈簧,75工業門邊,工業門扭簧,工業門包角,工業門門邊
全國服務熱線:聯系我們  
400-6080-090   
  • 工業快速門配件商城
  •   
  • 全國熱線:400-6080-090
  •   
  • 聯系人:于經理
  •   
  • 手機:18940220412(媒體勿擾)
  • 您現在的位置是   首頁>>最新資訊 >> 「提升門配件」滑升門鋼絲繩更換

      「提升門配件」滑升門鋼絲繩更換

      作者:提升門鋼絲繩更換   時間:2019/7/8 10:25:56
    •  


      「提升門配件」滑升門鋼絲繩更換


      Replacement of Sliding Door Wire Rope for "Lifting Door Accessories"

       



      工業提升門所使用的鋼絲繩在工業提升門向上升起時,它可以起到彈簧拉力的作用,從而達到減輕電機拉力負荷的目的。


      The wire rope used in industrial lifting door can play the role of spring tension when the industrial lifting door rises upward, so as to reduce the tension load of the motor.


      如果沒有鋼絲繩,時間一長,就很容易造成電機因負荷過大拉壞的情況。


      If there is no wire rope, a long time, it is easy to cause the motor pulled out due to excessive load.
       

       

      提升門鋼絲繩



      提升門的結構非常多,只有知道是那種結構提升門,才能給出調節鋼絲繩方法,建議打電話給提升門生產商詢問。


      The structure of lifting door is very many. Only when we know the structure of lifting door, can we give the method of adjusting wire rope. It is suggested to call the manufacturer of lifting door for inquiry.


      常用鋼絲繩有磷化涂層鋼絲繩、鍍鋅鋼絲繩、不銹鋼絲繩,大氣環境中使用


      Commonly used wire ropes are phosphating coated wire rope, galvanized wire rope and stainless steel wire rope, which are used in atmospheric environment.


      專利技術生產的錳系磷化涂層鋼絲繩使用壽命最長,目前疲勞試驗數據表明,磷化涂層鋼絲繩疲勞壽命是同結構光面鋼絲繩的3-4倍左右(試驗室可比條件下)


      The longest service life of manganese phosphating coated steel wire rope produced by patented technology is shown by fatigue test data at present. The fatigue life of phosphating coated steel wire rope is about 3-4 times as long as that of structured smooth steel wire rope (under comparable conditions in laboratory).


      不易磨損和不易銹蝕是鋼絲繩使用壽命超大幅度延長的原因,已經遠遠超越進口鋼絲繩,重腐蝕環境優選熱鍍鋅—磷化雙涂層鋼絲繩,僅供參考。


      Not easy to wear and rust is the reason why the service life of steel wire rope is prolonged by a large margin. It is far beyond imported steel wire rope. Hot-dipped galvanized-phosphated double-coated steel wire rope is preferred for heavy corrosion environment, for reference only.


      「提升門配件」滑升門鋼絲繩更換


      Replacement of Sliding Door Wire Rope for "Lifting Door Accessories"


       

      提升門鋼絲繩價格

       

       

      當你的工業提升門發生鋼繩斷裂時,要注意從以下幾個方面進行檢查:


      When the steel rope of your industrial lifting door breaks, you should pay attention to the following aspects for inspection:


      1、鋼絲繩的鋼絲直徑規格是否滿足承重要求,若不滿足要求,及時更換。


      1. Whether the wire diameter specification of the wire rope meets the bearing requirement or not, if it does not meet the requirement, it should be replaced in time.


      2、滾輪合頁等配件是否與鋼絲繩發生摩擦,導致鋼絲繩有出現損傷。發現有鋼絲繩損傷的,檢查是否有摩擦,有的話,及時排除。


      2. Whether accessories such as roller hinge friction with steel wire rope, resulting in damage to steel wire rope. If the damage of wire rope is found, check whether there is friction or not, and if so, remove it in time.


      3、鋼絲繩使用時間過長,且沒有做過潤滑、除銹等保養工作。檢查鋼絲繩各部件,對需加潤滑的部位添上潤滑油,清理銹蝕。


      3. The wire rope has been used for too long, and has not done any maintenance work such as lubrication and rust removal. Inspect the parts of the wire rope, add lubricant to the parts needing lubrication, and clean up the rust.


      那工業提升門的鋼絲繩發生脫落情況,這又是因為什么呢?原因主要有:工業提升門扭簧上的力量不夠或是沒有上到位、工業提升門上左右彈簧的松緊度不一樣、工業提升門彈簧平衡系統沒有調整這三個方面。


      The main reasons are as follows: insufficient or inadequate strength on the torsional spring of the industrial lifting door, different tightness of the left and right springs on the industrial lifting door, and no adjustment of the spring balance system of the industrial lifting door.


      此時,我們需要及時調整工業滑升門的平衡系統,特別是扭簧上的力量,使工業提升門左右兩側的彈簧松緊度保持一致,才能解決鋼絲繩脫落問題。


      At this time, we need to timely adjust the balance system of industrial sliding door, especially the force on the torsion spring, so that the spring tightness on both sides of the industrial lifting door keeps the same, in order to solve the problem of wire rope falling off.
       

       

       

       

       

    百度地圖 - 網站地圖 - 日本高清视频在线无吗_亚洲日韩国产欧美二区_思思久久96热在精品国产