最新優惠:
推拉門配件批發,工業平移門配件,電動提升門配件,車庫門彈簧,75工業門邊,工業門扭簧,工業門包角,工業門門邊
全國服務熱線:聯系我們  
400-6080-090   
  • 工業快速門配件商城
  •   
  • 全國熱線:400-6080-090
  •   
  • 聯系人:于經理
  •   
  • 手機:18940220412(媒體勿擾)
  • 您現在的位置是   首頁>>最新資訊 >> 「工業門扭簧」半垂直提升門扭簧上勁方法

      「工業門扭簧」半垂直提升門扭簧上勁方法

      作者:工業門扭簧批發   時間:2019/7/3 16:29:43
    •  

       

      「工業門扭簧」半垂直提升門扭簧上勁方法



      "Industrial Door Torsion Spring" Semi-vertical Lifting Door Torsion Spring Stiffening Method


       


      根據廠房門洞的大小,工業門的提升門方式可分為轉折提升、垂直提升兩種,而垂直提升方式又有完全垂直和半垂直之分。



      According to the size of workshop doors, the lifting ways of industrial doors can be divided into turning lifting and vertical lifting, while the vertical lifting ways can be divided into completely vertical and semi-vertical lifting.



      不論是何種提升門方式,平衡彈簧的設置都至關重要。今天,工業門配件廠家就來和大家聊聊垂直提升工業門的平衡扭簧設置要求。



      Regardless of the way of lifting door, the setting of balance spring is very important. Today, the manufacturer of industrial door accessories comes to talk with you about the requirements of balanced torsion spring setting for vertical lifting industrial door.

       

       

      提升門塔輪




      一、完全垂直提升工業門



      I. Complete vertical lifting of industrial doors



      平衡扭簧承受著統一重量的工業門門體,因此要想使扭簧扭力和工業門門重相平衡,只有改變輪徑的大小,故而這就需要安裝塔輪。



      The balance torsion spring bears the same weight of the industrial door body, so in order to balance the torsion of the torsion spring and the weight of the industrial door, only the size of the wheel diameter can be changed, so the tower wheel needs to be installed.



      在安裝完全垂直提升工業門的扭簧時,要注意預緊。



      When installing the torsional spring of the fully vertical lifting industrial door, attention should be paid to pre-tightening.



      一般來說,鋼絲繩的長度要根據塔輪線盤來確定,要保證提升門門體開啟到頂部時,鋼絲繩在塔輪上從大圈到小圈全部繞滿。



      Generally speaking, the length of the wire rope should be determined by the tray wheel. When the lifting door body opens to the top, the wire rope will be fully wrapped from the big circle to the small circle on the tray wheel.

       

      提升門塔輪安裝方法





      「工業門扭簧」半垂直提升門扭簧上勁方法



      "Industrial Door Torsion Spring" Semi-vertical Lifting Door Torsion Spring Stiffening Method



      二、半垂直提升工業門



      2. Semi-vertical lifting industrial door



      與完全垂直提升門不同,半垂直提升工業門的塔輪只需要半塔輪就能使扭簧扭力和門重保持平衡狀態



      Unlike fully vertical lifting doors, the tower wheels of semi-vertical lifting industrial doors need only half of the tower wheels to keep the torsional spring torsion and gate weight in balance.



      這樣以來,當工業門垂直提升門用的是半塔輪的塔輪部分,當工業門門上滑提升時用的是半塔輪的平輪部分。



      In this way, when the vertical lifting door of the industrial door uses the tower wheel part of the half tower wheel, and when the industrial door slides upward, the wheel part of the half tower wheel is used.



      同樣,在安裝半垂直提升工業門的扭簧時同樣也需要事先預緊,不同的是鋼絲繩的纏繞方法。



      Similarly, when installing the torsional spring of the semi-vertical lifting industrial door, it also needs to be pre-tightened in advance. The difference is the winding method of the wire rope.

       

      廠房門平衡系統




      在纏繞鋼絲繩時,先從半塔輪的大圈繞到小圈,注意要繞滿。



      When winding the wire rope, first from the big circle of the half tower wheel to the small circle, pay attention to the full circle.



      然后繼續繞在半塔輪的平輪上,至于平輪上鋼絲繩的圈數要根據門體上滑部分的提升高度來確定,不知道要纏繞多少圈數的需要事先咨詢專業技術人員。



      Then continue to wrap on the half tower wheel. As for the number of circles of wire rope on the flat wheel, it should be determined according to the lifting height of the sliding part of the door body. We do not know how many circles to wrap, we need to consult professional and technical personnel beforehand.



      如您需采購提升門配件,歡迎與我們的客服人員聯系,本公司支持全國配送上門,免費指導安裝。



      If you need to purchase lifting door accessories, please contact our customer service personnel. Our company supports the nationwide distribution of door-to-door, free installation guidance.

       

    百度地圖 - 網站地圖 - 日本高清视频在线无吗_亚洲日韩国产欧美二区_思思久久96热在精品国产